Wholesale Price Cnc Rebar Stirrup Bending Machine - Rebar Stirrup Bending Machine – Jindi
Wholesale Price Cnc Rebar Stirrup Bending Machine - Rebar Stirrup Bending Machine – Jindi Detail:
Product Parameters
Model | GF20CNC | GF25CNC |
Voltage | 3-380V 50HZ | 3-380V 50HZ |
Motor Power | 2.2KW | 3.0KW |
Motor Speed | 1440r/min | 1440r/min |
Rebar Bending Diameter Scope |
Common Carbon SteelØ4-Ø20mm | Common Carbon Steel Ø4-Ø25mm |
Grade Ⅲ Deformed Bar Ø5-Ø16mm | Grade Ⅲ Deformed Bar Ø5-Ø20mm | |
Bending Speed | 20-25times/min | 20-25times/min |
Weight | 92kg±5kg | 135kg±5kg |
Dimension | 800*520*820mm | 870*590*870mm |
Main Features
1. Convenient use: perfect safety performance, standard angle, fast speed, light and
handy.
2. Easy Operation: one man can operate it once switch on the power.
3. Convenient of range adjustment: for GF20 model, just need to shift induced magnet.
for GF20 CNC and GF25CNC model, just need to press the button on operation panel
4. We adopt two foot pedals: 90°and 135°, angle adjustment freely.
5. Fast Speed: rotate speed is 20-25 times/min (GF20), 25-30 times/min(GF25).
Structure Principle
First the motor rotates clockwise, decelerated by the gearbox via V-belt, then the work plate starts to turn drove by the main output shaft of gear box, when reaching definitive angel, angle adjustment assembly (at bottom of main output) cut off travel switch normally-closed contact, cut in normally-open contact or light-controlled received headers; cut contactor of motor clockwise, connect contactor of motor anticlockwise, then motor begins to rotate reversely. When work plate returns to initial position, light-controlled received headers automatic power off, motor stopped, then finished.
Product Details:
Installation and Use
1、Before use it, check if some screws of whole machines including electricity parts loosen or damages during the transportation.
2、Must install earth leakage circuit-breaker and connect earth ground when use it. 3、Usage: (1)It is clockwise rotation when the motor works, and it is anti-clockwise rotation when motor goes back. (2)Adjust the depth of parallelism and gap between the retaining plate and bending workpiece according to bending workpiece diameter. (3)Adjust the induction magnetic of angle adjustment assembly, turn it clockwise, then angle become smaller, and vice-versa. (GF20) (4)Adjust the CNC controller on operation panel, press + to add angle degree, press – to reduce angle degree. (GF20CNC, GF25CNC) (5)We adopt two foot pedals for 90°and 135°(180°), these angles are frequently used.
Product detail pictures:
Related Product Guide:
We pursue the administration tenet of Quality is superior, Services is supreme, Standing is first, and will sincerely create and share success with all customers for Wholesale Price Cnc Rebar Stirrup Bending Machine - Rebar Stirrup Bending Machine – Jindi , The product will supply to all over the world, such as: Mexico, Sri Lanka, Bangkok, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products have been exported to more than 15 countries in the world and have been widely used by customers.
By Evangeline from Cyprus - 2018.12.25 12:43
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Amelia from Bolivia - 2017.02.28 14:19